- page:   3 Previous   1 2 3 4 5 6 7 8 9   Next 4  
Snap-On -- Wrench Tool Tie Clasp or Money Clip- VTG.
Jewelry

Lemon Tree Treasures  
1244567   $10

Snap-On -- Wrench Tool Tie Clasp or Money Clip- VTG.
click for details
This is a VINTAGE, SNAP-ON TOOL tie bar or money clip. IT'S A 1/4" wrench with the SNAP-ON LOGO.3 inches long.

Champion De Arment Ball Pein Hammer,OLD Channelock
Tools

Packrats Plunders  
LA100397   Sold

Champion De Arment Ball Pein Hammer,OLD Channelock
click for details
I am offering a nice vintage hammer marked as described in above title. It has the name cast into one side of the head and a number “2” cast/embossed onto the metal on the underside radius behind the head. Hammer with handle weighs just under 2# and is about 10 ½” long. No other markings otherwise. Light casting or rust pits in a couple areas but very sound useable or collectible hammerhead. The handle is old and aged and even though it is very slightly loose on the head it could be... Click for details

Hilti 9/16”x16”,Drill, SDS 2 Carbide Insert, NOS, LOT 2
Tools

Packrats Plunders  
B100121   $20.00

Hilti 9/16”x16”,Drill, SDS 2 Carbide Insert, NOS, LOT 2
click for details
I am offering one drill as described in the above title. It is what is called a slow spiral flute with two carbide inserts, an overall length of 21 1/2” with a useable length of approximately 16”. It shows absolutely no use at all. It has the part number shown in the title stamped into the shank. I got it in a cardboard tube that I will ship it in, but do not KNOW that this is the original tube. I have 3 others I am listing at this same time. We are a non-smoking, pet-free home, however,... Click for details

Hilti 9/16”x16” Drill,SDS 2 Carbide Insert, NOS, Lot #1
Tools

Packrats Plunders  
B100120   $20.00

Hilti 9/16”x16” Drill,SDS 2 Carbide Insert, NOS, Lot #1
click for details
I am offering one drill as described in the above title. It is what is called a slow spiral flute with two carbide inserts, an overall length of 21 1/2” with a useable length of approximately 16”. It shows absolutely no use at all. It has the part number shown in the title stamped into the shank. I got it in a cardboard tube that I will ship it in, but do not KNOW that this is the original tube. I have 3 others I am listing at this same time. We are a non-smoking, pet-free home, however,... Click for details

Hilti 13/16”x16”, Drill, SDS 4 Carbide Inserts, NOS
Tools

Packrats Plunders  
B100119   $20.00

Hilti 13/16”x16”, Drill, SDS 4 Carbide Inserts, NOS
click for details
I am offering one drill as described in the above title. It is what is called a fast spiral flute with four carbide inserts, an overall length of 20 3/4” with a useable length of approximately 16”. It shows absolutely no use at all. It has the part number shown in the title stamped into the shank. I got it in a cardboard tube that I will ship it in that has an illegible P/N, but do not KNOW that this is the original tube. I have 3 others I am listing at this same time. We are a non-smoking,... Click for details

Hilti 11/16”x16”, Drill, SDS 4 Carbide Inserts,NOS
Tools

Packrats Plunders  
B100118   $20.00

Hilti 11/16”x16”, Drill,  SDS 4 Carbide Inserts,NOS
click for details
I am offering one drill as described in the above title. It is what is called a fast spiral flute with four carbide inserts, an overall length of 20 1/2” with a useable length of approximately 16”. It shows absolutely no use at all. It has the part number shown in the title stamped into the shank. I got it in a plastic tube that I will ship it in that is marked w/ P/N 340720/2 & TE-TX +11/16-21, but do not KNOW that this is the original tube. I have 3 others I am listing at this same time.... Click for details

Auctions click on pictures for all lots
J.T. Slocomb 1”-2” Vintage Micrometer, Pat May 12, 96
Tools

Packrats Plunders  
LA100363   $20.00

J.T. Slocomb 1”-2” Vintage Micrometer, Pat May 12, 96
click for details
I am offering a very neat and still very useable old micrometer marked as titled above plus also dated Apr 13 ’97. I am assuming these dates are both in the 1800’s. The tool seems to operate smoothly and properly and the old felt-lined wood box is still solid although a couple hinge screws have been lost and only one of them replaced, and it has seen an oily work bench or so and has numerous small scuffs and nicks overall. The original cover pattern is still very evident in most places. We... Click for details

Brown & Sharpe 1” Donut Micrometer Standard, VGC
Tools

Packrats Plunders  
LA100362   $8.00

Brown & Sharpe 1” Donut Micrometer Standard, VGC
click for details
I am offering the above titled item in good operable condition. It is very clean and was lightly oiled when I received it a few months ago so it has no pitting or corrosion and should be very useable. We are a non-smoking, pet-free home, however, this was brought to us used from elsewhere a short time ago, so cannot attest to all its history. I will always be willing to combine your multiple purchases to save shipping costs when feasible. Will ship USPS as 2 oz. First Class Mail

Lufkin No 8, Machinists Rule Clamp, 2x, NICE
Tools

Packrats Plunders  
LA100361   $12.00

Lufkin No 8, Machinists Rule Clamp, 2x, NICE
click for details
I am offering a pair of the above titled items for one low price. They are both in useable condition with normal age darkening and no hint of damage. Still smooth and free working. This item appears to have had a previous owners name ground off that was etched into it sometime in the past, but I bought them at an auction sometime ago, so no worries. We are a non-smoking, pet-free home, however, this was brought to us used from elsewhere a short time ago, so cannot attest to all its history. I... Click for details

Carbide Tipped 1/2" Shank Router Bits, Used, 15X
Tools

Packrats Plunders  
B100114   $10.00

Carbide Tipped 1/2
click for details
I am offering a 15-piece lot of what were probably originally ½” carbide tipped router bits with ½” shanks. ALL probably need to be re-sharpened to be at their best and may at that time be closer to 3/8” diameter on the cutting heads. Most would be useable as is, but nearly all have a few small nicks on edges. There are 2 that are single flute and measure 2 ¾” overall length with the diameter closer to 9/16” and 1 ¼” flute length. The rest are all 2 flute. There are 3 that are 2... Click for details

“Ray” Packer Automotive, ¾” Ratchet Box Wrench, Lot#1
Tools

Packrats Plunders  
LA100340   $5.00

“Ray” Packer Automotive, ¾” Ratchet Box Wrench, Lot#1
click for details
LOT #1, I am offering a nice old ratcheting box wrench that is stamped “RAY” inside a sunburst of rays. Ratchet sounds solid and it seems to operate properly, but have not applied any real pressure on it. It has two threaded pins through the handle that may be an added feature by a previous owner. Measures about 7 ¾” long. I am listing several other listings of old wrenches and sockets with names on them, such as Walden Worcester, John Deere, International, and more. I will always be... Click for details

5/8” Double Socket Speed Wrench, Walden Worcester?
Tools

Packrats Plunders  
LA100341   $5.00

5/8” Double Socket Speed Wrench, Walden Worcester?
click for details
Lot#31, I am offering an old socket wrench as described in title above. It is unmarked, but quality seems very similar to Walden tools. It is in excellent condition with no noted damage or problems. Six point sockets on both ends measure 5/8”. It measures about 12 ½” long and about 5 ½” high. I am listing several other listings of old wrenches and sockets with names on them, such as Walden Worcester, John Deere, International, and more. I will always be willing to combine your multiple... Click for details

M58, Cast Iron Buggy/Farm Implement Wrench
Tools

Packrats Plunders  
LA100342   $4.00

M58, Cast Iron Buggy/Farm Implement Wrench
click for details
I have been unable to determine who the manufacturer may have been, or what their original intended uses were for any of them, but still useable, and all will display real nice. It measures right at 5 ¾” long and has openings of about 3/8”, 9/16”, & 11/16”. This item will also be on display at Lincoln Antique Mall, Lincoln Mo. so please check with me regarding availability if interested. Thank you very much for looking.. Will ship as 8 oz USPS First Class.

2811C Cast Iron,Dayton Buggy Wrench
Tools

Packrats Plunders  
LA100343   $4.00

2811C Cast Iron,Dayton Buggy Wrench
click for details
I have seen this tool listed as a Dayton Buggy wrench, but I have been unable to determine for sure who the manufacturer may have been, or what its original intended use was. It is about 6 ½” long w/ ½” open end & 1” Box end. It is in very good condition with no pitting and only the very slightest bit of mild rust. This item will also be on display at Lincoln Antique Mall, Lincoln Mo. so please check with me regarding availability if interested. Thank you very much for looking.. Will... Click for details

Cast Iron Multi-Size Farm Home Implement Wrench
Tools

Packrats Plunders  
LA100344   $6.00

Cast Iron Multi-Size Farm Home Implement Wrench
click for details
I have been unable to determine who the manufacturer may have been, or what their original intended use was for this near new looking wrench but still very useable, and will display real nice. It is about 10 ¼” long w/ 7/16”, 5/8”, & ¾” openings and 1 ¼” box end. No damage or wear apparent, but the very slightest bit of mild rust in one 1” long area. This item will also be on display at Lincoln Antique Mall, Lincoln Mo. so please check with me regarding availability if interested.... Click for details

Walden-Worcester #3620, Model T Headbolt/Sparkplugs,
Tools

Packrats Plunders  
LA100345   $6.00

Walden-Worcester #3620, Model T Headbolt/Sparkplugs,
click for details
LOT #28, I am offering one old combination 5/8” socket wrench x 15/16” offset handle box end wrench that I have seen listed to be used on head bolts and spark plugs on Ford Model T autos. It is in VGC++ condition. It is stamped well and shows virtually no use. It measures about 11” long. I am listing several other listings of old wrenches and sockets with names on them, such as Ford, Walden Worcester, John Deere, International, and more. I will always be willing to combine your multiple... Click for details

- page:   3 Previous   1 2 3 4 5 6 7 8 9   Next 4  
   

Oh look... Skytrackers!
(news, offers and more)


Articles of Interest


Visit TROCADERO
for fine antiques and art.

vintage postcard
"Hollywood Boulevard at Night".
vintage postcard. California, 1940s



Auctions
click for all lots

 Directory (all items): Tools (132)  


Cyberattic collectibles and antiques online mall.

aVerVendicompany
enabling vibrant online markets ©2011


Collectibles and Antiques on CYBERATTIC. CYBERATTIC Home Page New listings for sale in the Rafters. Collectable and Antique Storefronts and Catalogs. Join the collectible dealers on Cyberattic.