This bowl holds over 1 gallon. It is approximately 4 1/2 inches in height and 9 1/2 inches in width. There are no chips, cracks, breaks, rough rim, repairs, but does have some light marks, which looks more like manufacturing anomalies than damage. Additional photos by email. I need your zip code to calculate the postage..
Unknown manufacturer of this vintage piece. The bottom piece is divided. It is a very hefty 3 1/2 pounds and measures 3 1/2 inches in height (height measurement does not include the solid brass knob) and 6 1/2 inches across the top. There are some rim flakes on the lid. Additional photos by email. I need your zip code to calculate the postage.
Vintage 10 1/2 inch skillet from the days of Revereware when it was manufactured in the USA. The interior is stainless and the exterior is copper clad. The handle looks like brass. The handle is marked Paul Revere Limited Edition and the bottom dated 1976. There are no dents or dings, but there are cleaning and usage marks to the interior and exterior. The bottom needs polishing and cleaning, but I was afraid to do much cleaning for fear of damaging the copper. Additional photos by email. ...
Vintage oil lamp base measuring 8 inches in height. The brass ring has darkened with age. There are several manufacturing imperfections to the glass. The interior needs to be cleaned. I need your zip code to calculate the postage.
Vintage General Electric Automatic Grill and Waffle Baker Model G-44. It comes with the original tag and booklet which gives instructions in use and care, as well as several recipes. The booklet is dated 1962. It heats up, but I've not had a chance to make a batch of waffles and give a complete test. The last time I made waffles using it, was 1993, and it worked just fine. The removable reversible griddles are not the non-stick type. There are some usage and cleaning marks to the chrome. ...
The bowl is not marked, but I believe it was manufactured by Anchor Hocking. It is a master size of 4 quarts. There is minor wear to the gold trim on the rim. Additional photos available. I have matching cruets and shakers available for purchase. All are priced individually. I need your zip code to calculate the postage.
Earrings marked as 925 Mexico. The body has a slightly convex curve and is outlined in what could either be a brass or gold wire. They measure 1 3/4 x 1 1/4 inches. I do not know if these would be considered kissing fish. There is no damage, but I've never polished them. There is a lot of reflection and glare in the photograph, but I do have additional close-up photos by email. I need your zip code to calculate the postage.
Vintage porcelain planter stamped S662. I do not know the manufacturer and where it is from, although it looks somewhat like a Japanese production. It measures 6 3/4 x 4 x 3/4 x 4 1/4 inches. There are no chips, cracks or breaks. Complete condition and backstamp photos are available by email. I need your zip code to calculate the postage.
This bowl or relish dish measures 9 1/4 x 5 7/8 x 2 inches. It is marked as Bavaria Schumann Germany US Zone. It has a green stamp of 46 and gold stamp of 45. It has an old foil label from C. F. Hoffman & Sons, Jewelers, Gadsden, Ala. There are no chips, cracks, breaks, rough rims or repairs. There is a minor amount of loss to the gold trim on the rim. Please request additional identifying photos, as this particular center rose design was used on many patterns. The pink of the roses are s...
Vintage brass figure measuring 7 1/2 inches in height. It is not marked, but looks and feels like solid brass. The base looks like Bakelite, but don't think it is old enough, so would think it is some type of resin. It has no damage. I need your zip code to calculate the postage.
Unworn with original labels cardigan style sweater in Chata Rose. It is a size medium. Please email for measurements and close-up photos of the labels. I need your zip code to calculate the postage.
Vintage porcelain King Charles Spaniel figurine marked Shafford Lovables Japan. It measures 8 1/8 x 4 x 3 inches. There are no chips, cracks, breaks, flakes or repairs. I need your zip code to calculate the postage.
Vintage porcelain figurine of Mary and Baby Jesus on a donkey, Joseph and an angel. It is a very nice quality material with a lot of attention paid to the details. It measures approximately 12 3/4 x 9 inches. I do not know the age or the manufacturer. There are some chips on the "lacey" trim, and I will be happy to provide complete condition photos by email. I need your zip code to calculate the postage
I am not sure of the pattern name - at first I thought it was one of the Harvest patterns, but haven't been able to identify. It is marked FF Oven to Table. There are no chips, cracks, breaks or repairs. It has some minor usage marks, which includes a small amount of loss of finish to one of the carrots. It is shown in the photo, but have additional pics. I need your zip code to calculate the postage.;
I bought this bowl several years ago from a young lady, who was selling her grandmother's kitchen items. She told me that her grandmother had bought the bowl in Germany. See photo #2 for the backstamp information. It is approximately 6 1/4" across the top and 3" in height. It reminds me of a Zell color, but have never seen one with this design or style, so would suppose it is another manufacturer. It might possibly have been intended to be part of a mixing bowl set. I say this, because I ha...
This beater bowl is marked Revere and USA. It is the 7 1/2" size. I have neglected this bowl terribly because it stayed in a box with other pots and pans after a move from Florida in the early 1990's. I have not attempted to rehabilitate the poor little thing. It is without dents. I am not sure if it could be restored to a suitable condition for actually beating your egg whites or if it would best be given a minimal amount of care and use for display purposes. If you have any questions re...
Very lovely quality glass, and although I have an idea of the manufacturer, I prefer to say "manufacturer unknown." I will be glad to sell it as replacement pieces and the cost will be determined by the size of the tray needed. The 1st tier is approximately 11 1/4 inches, 2nd tier 9 inches and 3rd tier 6 inches. It has been packed away from a move, in my basement, and it must have been damper than I realized, because the metal portion is in very bad condition. At this point, the rod that fits...
This is the 127 Electric Eye model. So far, I've not been able to find the flash attachment which snaps to the case. Additional photos or info by email. I need your zip code to calculate the postage.