Pair of Old Chevy Arm Rests in their original boxes and even has the original mounting instructions and template. Part #3833990. These are slightly used and in great condition for their age. They are 9 3/4" long and 3" wide. A great and rare find.

I'm selling a set of three vintage auto headlight lens. They are in perfect condition and are 8 1/2" diameter. They are marked: Liberty Lens, Macbeth - Evans Glass Company, Pat. Dec 8, 14, No. 4764 - 8 1/2. This item is in excellent condition, No chips, cracks, flakes or other damage.

Selling a pair of vintage Flintex headlight lens made by Jeannette Glass Co, Jeannette, Pa. The "Top" and "8 5/8" is embossed on the opposite edge from the manufacturer's name. The letter "J" is on each side edge. The word "Flintex" is in the middle. There are a couple very tiny dins on the edge.

I'm selling a set of THREE vintage auto headlight lens that are marked in the center, "Way-A-Head", "Pittsburg PA", "Pat'd" and marked on the edge is: "Top 8 1/2". The diameter is 8 1/2" and the center of the lens is raised 1 1/2". Attached on the back of the lens are three pieces of frosted glass (I'm guessing) to direct the light downward. (?) You'll find a couple of very tiny dins on the edges of the lens. Note the last picture above, one lens does have a crack...

I'm selling a set of THREE vintage auto headlight lens that are marked, "Macbeth", "Macbeth - Evans, Glass Company, Pittsburgh", Pat Dec. 8 '14. No 4703 - 8 3/8" . You will find a couple of very tiny dins on the edge of all three lens.

I believe this Blue Glass Chevy Emblem would fit over the center bend of an older Chevy model vehicle. It's made of white metal and blue glass. The second picture shows a crack in the center of the glass. The glass is still tight, it won't come out cause of the crack. It's still a good old neat piece. It's 7 3/4" long.

Early Ford Thunderbird emblem. It's 19 1/2" long and 4 5/8" wide. Needs to be re-chromed, and 3 pins behind the "old Ford" emblem are missing, otherwise no cracks.

Early Ford Thunderbird emblem and trim. Needs to be re-chromed, otherwise everything in good shape.